Yamaha VIRAGO Stage 2:
Replacement iron liners + pistons
This engine is the same base as 250 yamaha engine, so all the parts ar too big for a 125.
After modifications, the result is an engine that grows at low revs and takes as many laps as the original.
You will have a gain in torque of 25% allowing you to pass a car without shift down. The speed will be increased from 10 to 15km/h. The most sensitive it is when you turn throttle at 80km/h, you will have a real push to acceleration, while original, it does not happen anything.
The maximum speed will be faster and more often reached. You will no longer have to shift down during a gust of wind.
This product is very reliable, we proposed it since 2000. We guarantee against all hidden defects. (Provided that the cylinders are modified by the workshop recommended for the assembly of the liners into the cylinders which will be communicated with the parts)
List of supplied components: 2 cast iron liners (will be replaced in your own cylinders), 2 cylinder gaskets, 2 cylinder head gaskets, 2 piston kits complete.
For use with the kit admission ref 39 only.
All our products are delivered pre-set. So you have only a disassembly / reassembly work to perform. (Only the air box cover needs to be drilled or cutted)
PROCEDURE:
Contact us to confirm the availability by email. Then, disassemble and send us your two cylinders completely naked and well packaged to the address that you have received by mail after your order (Take care, they are closed in August every year). About 15 to 21 days later, you will receive your cylinders ready to go up.
The installation of a kit allowing to exceed the legal limits of the category of your vehicle, (for example 125cm3 or 15hp).It is your responsibility to bring yourself into compliance with the laws of the country where the product will be used. Reserved only for the competition.
NB we recommend keeping the original exhaust system, which on this bike offers the best efficiency.
adapted to drive.
